蜂窝结构的焊点位置控制方法研究

蜂窝结构是航空发动机中的重要封严结构,随着航空航天工业的飞速发展,该结构的需求也日益增多。蜂窝拼焊的自动化生产是实现蜂窝结构高效率生产的有效方法之一。针对蜂窝结构自动化生产中的关键问题,即焊点的位置精度,分析了原有工艺和系统的不足。在基于ACR9000运动控制器平台上,针对焊点精度,分别提出了基于电机编码器的位置控制和轴同步原理的方式。结果证明,这两种方法能够很好地实现焊点位置的精度要求,使蜂窝高质量高效率生产。     

飞秒激光能量密度对镍基合金重铸层和加工效率的影响

以航空发动机叶片制孔为导向,结合飞秒激光对单晶镍基高温合金材料的非热熔性损伤阈值(Φth1)和热熔性损伤阈值(Φth2)特征,研究了飞秒激光能量密度(0Φ44.2J/cm2)对制孔重铸层和加工效率的影响规律。研究结果表明:在Φth1ΦΦth2时,镍基合金经飞秒激光加工后加工侧壁没有出现明显的重铸物;在ΦΦth2时,加工侧壁开始出现重铸物,并随着能量密度的增加,重铸层厚度增大。在试验结果的基础上,建立了飞秒激光单脉冲加工深度与能量密度的定量关系。能量密度越高,飞秒激光单脉冲加工深度越大,加工效率越高。     

一种基于观测站数目最小化的TDOA/FDOA无源定位算法

在三维（3D）运动目标无源定位系统中，无模糊定位最少需要4个观测站。而传统的两步加权最小二乘（TSWLS）及其改进的闭式算法至少需要5个观测站进行求解，当减少一个观测站时，这些闭式算法往往无法提供可靠解。针对这一问题，提出一种最小化观测站数目的到达时间差（TDOA）与到达频率差（FDOA）定位算法。该算法是一种闭式解法并且能够在三维场景下仅使用4个观测站进行定位。该算法分为两步：第1步分离传统的TSWLS算法中未知参数空间，建立了一组新的等式，并且利用加权最小二乘（WLS）算法得到目标位置与速度的初始值；第2步利用泰勒级数展开算法将中间变量线性化，对目标位置和速度初始值进一步校正。理论分析证明了在适当的噪声水平下该算法能够达到克拉美罗界（CRLB）。此外，计算机仿真表明仅使用4个观测站时，该算法对于近场以及远场目标参数的估计精度在测量噪声较小时可以实现CRLB；并且还表明使用5个观测站估计时，该算法比TSWLS及其改进算法能更好地适应大的测量噪声。     

DME Interference mitigation for L-DACS1 based on system identification and sparse representation

L-band digital aeronautical communication system 1 (L-DACS1) is a promising candi-date data-link for future air-ground communication, but it is severely interfered by the pulse pairs (PPs) generated by distance measure equipment. A novel PP mitigation approach is proposed in this paper. Firstly, a deformed PP detection (DPPD) method that combines a filter bank, correlation detection, and rescanning is proposed to detect the deformed PPs (DPPs) which are caused by mul-tiple filters in the receiver. Secondly, a finite impulse response (FIR) model is used to approximate the overall characteristic of filters, and then the waveform of DPP can be acquired by the original waveform of PP and the FIR model. Finally, sparse representation is used to estimate the position and amplitude of each DPP, and then reconstruct each DPP. The reconstructed DPPs will be sub-tracted from the contaminated signal to mitigate interference. Numerical experiments show that the bit error rate performance of our approach is about 5 dB better than that of recent works and is closer to interference-free environment.     

中红外激光在光电对抗领域的应用及进展

近年来为有效对抗先进的红外制导武器的威胁，先进的红外对抗手段和方式不断推陈出新。其中利用中红外激光辐射致盲、致炫和毁伤的手段可以有效地对抗红外制导武器的威胁。为此本文重点介绍了中红外激光在光电对抗领域的应用；然后，对中红外激光光源和分类及其原理进行了阐述，并介绍了美国和俄罗斯在中红外光电对抗的系统领域的发展现状；最后，对中红外（3-5μm）光电对抗的应用发展和未来的趋势进行了总结，并对化学、气体和固体中红外激光光源的应用进行了展望。     

基于量子化、芯片化的先进计量测试技术发展动态

计量是国家质量基础的重要组成部分，产品质量的提升离不开科学、精准的计量。工业发达国家极为重视计量测试技术的发展。通过搜集、整理量子效应计量、芯片级计量等国内外大量文献资料，归纳分析了近年来国外先进计量测试技术发展动态与趋势。以量子技术和基本物理常数为基础建立量子计量基标准，将大幅提高测量准确度和稳定性，结合量子效应的微加工技术实现芯片尺度的测量等，微纳尺度计量技术也在科学研究、精密测量、智能制造等领域得到广泛应用。本文可为我国计量技术发展提供借鉴。     

绿色技术创新对企业成长绩效的影响——基于研发投入强度的调节作用

随着我国经济的高速发展,生态问题日渐凸显。通过技术创新处理好经济发展和生态效益的关系成为实现绿色发展的内在要求。本文利用94家创业板制造业上市公司2014—2017年的数据,采用广义最小二乘法对绿色技术创新、研发投入强度与企业成长绩效之间的关系进行实证分析,探讨了绿色技术创新对企业成长绩效的直接影响,并对研发投入强度的调节作用进行分析。结果显示:绿色技术创新对企业成长绩效具有显著的正向影响;研发投入强度对绿色技术创新与企业成长绩效的关系产生显著的负向调节作用。     

A shortcut to marking 3D target curves on curved surface via a galvanometric laser scanner

Marking arbitrary three-dimensional(3D) target curves on given objects with curved surface is required in many industrial fields, such as fabric prepreg placement in composite material part fabrication, product assembly, surface painting for decoration, etc. A shortcut to the solution of this intractable problem is proposed by utilizing a galvanometric laser scanner(GLS) with the aid of a camera. Without using the existing tedious GLS calibration procedures,the proposed method directly establishes a mapping between the 3D coordinates of the laser spots on the object surface and the control voltages of the scanner. A single-hidden layer feedforward neural network(SLFN) is employed to model the mapping. By projecting a dense grid of laser spots on the object to be marked and simultaneously taking only one image, the SLFN model is trained in minutes via a linear solving mechanism. Experiments demonstrate that the trained SLFN model has a good generalization performance for marking 3D target curves. The 3D laser marking errors on experimental objects are less than 0.5 mm. The proposed method is especially suitable for on-site use and can be conveniently extended to multiple GLSs for marking large complex objects.     

几种生长模型参数的最小二乘估计方法及应用

提出一种Logistic模型、Gompertz模型、Mitscherlich模型和Bertallanffy模型的分布参数估计方法，这种方法以加权最小二乘法为基础，推导求解分布参数的方程组。利用这类曲线模型中参数形式的特点，使同时求解三个参数的问题简化为同时求解两个参数的问题，并给出求解参数耦合方程组的二重二分迭代法。预测地基沉降的计算实例表明，这种方法对于迭代初值的选取要求较低、求解速度快、精度高，而且通过选取权因子可以对已有数据实现“重近轻远”的处理。     

Semi-stochastic modification of second-order radial derivative of Abel–Poisson’s formula for validating satellite gravity gradiometry data

The geoid can be used to validate the satellite gravity gradiometry data. Validation of such data is important prior to their downward continuation because of amplification of the data errors through this process. In this paper, the second-order radial derivative of Abel–Poisson’s formula is modified stochastically to reduce the effect of the far-zone geoid and generate the second-order radial derivative of geopotential at 250 km level. The numerical studies over Fennoscandia show that this method yields the gradients with an error of 10 mE and when the long wavelength of geoid is removed from the estimator and restored after the computations (remove–compute–restore) the error will be in 1 mE level. We name this method semi-stochastic modification. The best case scenario is found when the degree of modification of the integral formula is 200 and the long wavelength geoid to degree 100 is removed and restored. In this case the geoid should have a resolution of 15′ × 15′ and the integration should be performed over a cap size of 3°.